Usage ST-LINK V2 Tutorial. STM32 Programming for Beginners. Cheap clone ST-Link comparation

Share
Embed
  • Loading...
  • Published on:  Saturday, March 26, 2022
  • In this video you will learn how to program STM32 microcontrollers using STLink. You will also see the difference between the original STLink and its cheap clone.
    Links for software and electronics:

    ST-Link Utility
    https://www.st.com/en/development-tools/stsw-link004.html

    STM32CubeProgrammer
    https://www.st.com/en/development-tools/stm32cubeprog.html

    ST-LINK/V2 Programmer 20PIN Out (Clone)
    https://ali.ski/Rv6JQ
    https://ali.ski/1jI_B
    https://ali.ski/80Y47
    https://ali.ski/N3t_AO
    https://ali.ski/bj3FFu
    https://ali.ski/IoaS5
    https://ali.ski/GJ_hd

    ST-LINK/V2 10PIN Out
    https://ali.ski/dNM-E
    https://ali.ski/N24kAO
    https://ali.ski/AbGrr
    https://ali.ski/pXbnK
    https://ali.ski/dYRjN
    https://ali.ski/d1Rm-

    STM32F401 STM32F411 Development Board
    https://ali.ski/WL6Xay
    https://ali.ski/lKOkn
    https://ali.ski/qQO6O
    https://ali.ski/8ULP2q
    https://ali.ski/3nFttH
    https://ali.ski/e7A82

    STM32F030F4P6 Development Board
    https://ali.ski/3wTT0d
    https://ali.ski/qgfXkI
    https://ali.ski/Yvd6v
    https://ali.ski/qpcKD

    --------------------------------------

    Links:
    My web: http://nanoslavic.com/
    Twitter: https://twitter.com/nanoslavic
    Instagram: https://www.instagram.com/nanoslavic/
    My art http://nudeelectronics.art
    Free photos of electronics https://pixabay.com/users/nanoslavic-17278421/
    My Russian Channel: https://www.faceclips.net/channel/UCV-6hEx_fxkrsyH0Jvte49w
    Telegram group: https://t.me/nslavic

    *NOT SPONSORED, SOME LINKS ARE AFFILIATE LINKS

    #STM32 #Nanoslavic #STLink #STM32Tutorial

    0:00 Вступление
    0:33 ST-Link V2 Cheap clone
    0:48 STM32F030F4P6 Development Board
    1:02 STM32F401CCU6 Development Board
    1:29 I am using ST-Link Utility
    2:20 Update ST-Link firmware
    2:46 Connect to microcontroller
    3:06 Open the firmware binary
    3:10 LED blink firmware
    3:19 Start programming
    3:36 Disconnect from the microcontroller
    5:01 Connect to the microcontroller
    5:05 Erase memory
    5:16 Reset pin allows faster entry into programming mode.
    6:33 The chip without marking
    6:39 Original
    7:48 1.27 mm pitch connector
  • Source: https://youtu.be/NAWpqNjOGlc
Loading...

Comment